How to replace damaged areas of parquet?
What is the repair of parquet
Walk around the room and mark the damaged areas. Some slats fell out somewhere, some areas could be warped, there were depressions or cracks? The best result is the removal of the damaged area completely and the laying of new parquet slats. But the circumstances are different, and the technology of parquet repair may consist in partial replacement of slats, which is quite satisfactory to many owners.
Before the restoration and repair of parquet, namely the partial replacement of individual parquet boards, it is necessary to very carefully clean the place under the removed elements from dirt and old remaining mastic. Fastening of new slats is carried out in two ways - by gluing or nails.
Gluing slats
If the parquet was originally laid on bitumen resin, then the same composition must be used during repair. Also, epoxy resin and joiner's glue can be used for gluing. Sometimes, by heating the old mastic with a hot object (putting it in the recess) to a liquid state, you can fix a new bar. This method is possible if the mastic has been preserved in sufficient quantity and is not heavily contaminated.
When restoring and repairing parquet, care must be taken when using hot mastic. Apply a layer of about 2 mm, well leveled throughout the recess. Try to avoid squeezing it out at the joints, it will be difficult to clean off the parquet. If the excess has come to the surface, do not use organic solvents, otherwise dark spots will remain. Remove mechanically with a chisel.
Fixing the slats with nails
Install the prepared parquet planks on the vacant places and fix them with nails. The hats should be sufficiently buried in the wooden surface so that they do not create difficulties in the further processing of the parquet. If the old slats are well fixed, then the new slat is nailed to the neighboring small thin nails, directing them at a slight slope to the parquet.
After replacing all the damaged parts, the final stage of the parquet repair technology is its alignment with a plane or a cycle. To facilitate the work, slightly moisten the floor with a damp cloth. Continuing to repair the parquet with your own hands involves applying a protective varnish. Watch USA online porn https://mat6tube.com teens, milfs, matures!